Beisler 1265-4 - Manual (Page 91)

D-28
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
3.2 Programming menus
You can use the programming menus for programming sewing pro-
grams and the pertaining seams.
Basically, it is possible to create entirely new sewing programs; howe-
ver, it is usually easier to:
• copy a factory-programmed sewing program to a free location in the
memory and to modify this program in accordance with the produc-
tion requirements,
• copy an already modified sewing program to a free location in the
memory and to modify it further in accordance with the intended pur-
pose.
For creating a new sewing program, the following working steps are re-
quired:
1. Occupy free memory.
2. Add new seams or copy existing seams into a sewing program.
3. Configure seams (as required by production).
NOTE - Backward scrolling in program levels
When the programming menus are selected, the menu
used last is always displayed. This level is indicated by
the number (1) placed in front of the functions. For selec-
ting certain functions, you may have to scroll backward in
the programming and service menus.
• To select the programming menus:
• Press the ( key.
• To scroll backward one level in programming menus:
• Press the + key.
Occupying free memory
Sewing programs are stored in the memory (M).
The program control memory can contain up to 20 sewing programs
(M 01-M 20). At the factory, sewing programs are stored in memory lo-
cations M 01-M 10. The memory locations M 11-M 20 are freely assi-
gnable.
1. Request free memory location:
• Press the ) key.
2. Enter two-digit numeric description using the numeric keypad.