Beisler 1265-4 - Manual (Page 71)

D-8
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
3.1 Operational menus
The functions of the operational menus extend over two access levels.
The menus can be selected after the program control has been initiali-
zed or directly after each RESET.
Functions on access level 1
The function keys for access level 1 are assigned to the symbols above
them. These symbols remain unchanged and are always visible.
abcdefgh
jTst==S+
F1 Select operational menu access level 2
F2 Manual sewing, controlled by footswitch
F3 Select sewing parameters / Enable or disable machine functions
F4 Select machine parameters
F5 Not used
F6Not used
F7 Activate stacker manually
F8 Pass thread through needles
Selecting access level 2
• Press the a key.
j
Manual sewing, controlled by footswitch:
When the front of the pedal is depressed, the sewing process starts.
The sewing speed depends on the applied pressure, i.e. the more pres-
sure applied, the higher the speed. When the rear of the pedal is de-
pressed, the machine switches to automatic operation.
1. Select the function:
• Press the b key.
T
2. The display shows the symbol for Manual seam:
U
3. To disable the function, press the F2 key again.