Beisler 1265-4 - Manual (Page 78)

D-15
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
16 PULLER SLOWER
Speed reduction if sewing piece is shifted away from stop
17 DISTANCE TO PULLER DOWN
Distance after sewing start before the puller is lowered
18 DISTANCE W/PULLER DOWN
Distance along which the puller transports the sewing piece
19 DISTANCE PULLER LIFTS
Length of the distance along which the puller moves up to slacken
the sewing piece
33 TILL ASSIST ROLL DOWN
Distance after sewing start before the contour roller is lowered
(start at waistband: photocell 13, start at hem: photocell 15)
34 WITH ASSIST ROLL DOWN
Length of the distance along which the contour roller moves along in
the lowered state
x Roller
The parameter changes the length of the distance along which the roller
transports the sewing piece on the worktable from the sewing head to
the stacker.
25 STITCH TILL ROLLER DOWN
Sewing distance after sewing start before the roller is lowered; only
required for heavy materials
26 STITCH WITH ROLLER DOWN
Length of the distance along which the roller transports
27 TILL ROLLER STOP / CUTTER
Distance along which the roller travels before it stops for chain cut-
ting
28 ROLLER STOP DURATION
Period during which the roller stops for chain cutting
30 ROLLING DISTANCE [18]
Major parameter / basic setting of the roller transport distance for
transferring the sewing piece to the stacker
31 TILL STACKER START
Duration until stacker start after the roller moves up (secure sewing
piece until the stacker has safely picked up the sewing piece)
32 STACKER MODUS
Setting for various stacker processes (stacker types)
Enable function = 01
Disable function = 00