Beisler 1265-4 - Manual (Page 7)

Working Instructions Automatic Single-Head Serging Machine Beisler GmbH
A-7
A.1
Safety instructions
A.1.5 Important information for the operating personnel!
Please note that any work to the automatic single-head serging machi-
ne 1265-4 must be carried out only by trained operating personnel:
• Operating personnel means persons:
that have been given initial instructions for sewing automats and that
have been trained for the operation and handling of the automatic
single-head serging machine 1265-4 on the basis of these operating
instructions,
that have been informed about potential risks arising from their work
with the machine,
that are capable of assessing their work with the machine due to oc-
cupational experience and instruction of the safety regulations and
of recognizing potential hazards during work,
• Cleaning of the machine or of machine parts must be performed only
by personnel that has been informed about potential hazards arising
during the cleaning work.
• Prior to the initial operation of the automatic single-head serging ma-
chine 1265-4, read the operating instructions carefully so that you
can make full use of the advantages of the machine and to prevent
damage.
A.1.6 Important information for the service personnel!
Please note that service work to the automatic single-head serging ma-
chine 1265-4 must be carried out only by authorized and adequately
trained expert personnel:
• Expert personnel means persons:
that have aquired their expertise by a special training in machine
technology or electrical engineering or by a special advanced trai-
ning or a comparable qualification,
that have acquired the knowledge required to perform all works for
setting up and servicing the automatic single-head serging machine
1265-4 from a training by Beisler GmbH,
that are capable of assessing their work with the machine due to oc-
cupational experience and instruction of the safety regulations and
of recognizing potential hazards during work.
• Prior to carrying out any service work to the automatic single-head
serging machine 1265-4, read the entire working instructions care-
fully so that you can make full use of the advantages of the machine
and to prevent damage.