Beisler 1265-4 - Manual (Page 76)

D-13
Programming Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
D.3
Programming
Fig.10: Inseam, sewing starts
at hem. Line-up position when
using the optional bonding
station.
To set the fullness range values separately for differential transport and
for top transport:
1. Fullness basic setting (only available if the Top Transport function is
enabled).
2. Separat setting of fullness (quantity) for a section. This section has
to be activated so that the setting is enabled.
3. Length of an individual section for which fullness is to be enabled.
4. Function SLOW SEWING (only for differential transport).
NOTE - Quick access
The quick access for fullness (value range -19 to +19) app-
lies only to an activated section. If a section is deactiva-
ted, sewing is performed using the basic settings or using
the specific values that have been set for a section.
Settings for differential transport and top transport:
1. Select the function differential transport / top transport:
• Press the c key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Modify the value:
• Press the & or / key.
3. Confirm input and exit menu:
• Press the ( key.
Fig. 10