Beisler 1265-4 - Manual (Page 31)

Operating Instructions Automatic Single-Head Serging Machine 1265-4 Beisler GmbH
B-21
B.3
Operation
. Sewing speed at waist curve
The parameter changes the basic value of the puller speed when the waist
curve is sewn. Depending on the waist curvature, a puller speed that has
been adapted accordingly can be set.
Enabling or disabling functions
For specific sewing patterns or as the result of a specific material beha-
vior, all six functions can be enabled or disabled individually or in combi-
nations.
1. Select the function:
• Press the c key,
s
until the symbol assigned to the input field appears on a black back-
ground.
2. Move to the basic parameter menu of the selected function:
• Press the % key.
3. Enable or disable the function:
• Press the h key.
4. Confirm input:
• Press the ( key.
Fig. 18: When the program function Sewing speed at waist curve 2 is
selected for the side seam 1 with seam number 7, the corresponding
parameter list for this special sewing function 5 is opened.
Press the F8 key 4 to enable or disable the function Sewing
speed at waist curve 3.
For details about the programming of seams, please refer to
Section D, Programming Instructions, of these working instruc-
tions.
Abb. 18