Faronics Power Save - Manual (Page 55)

Administrator
|
55
Faronics Power Save User Guide
Administrator
The Administrator node allows you to monitor and manage Power Save.
Administrator Node
The Administrator node consists of the following configuration options:
Run in Full Operation Mode
Click Run in Full Operation Mode if you want Power Save to manage the power usage on the
computer. Alternatively, select one or more workstations, right-click and select Power Save
Mode> Enable Full Mode.
Run in Audit Only Mode
Click Run in Audit Only Mode to run Power Save in Audit Only Mode. In the Audit Only Mode, the
Power Save actions are disabled. However, Power Save will record the events on the workstation.
The events recorded are startup time, shutdown time, monitor on time, monitor standby time,
computer standby time, computer hibernate time, and computer sleep time (Windows Vista and
Windows 7 only). The recorded events can be analyzed using Power Save reports.
Alternatively, select one or more workstation, right-click and select Power Save Mode> Enable
Audit Only Mode.
While running in Audit Only Mode, the Power Save actions are disabled. Power
will not be saved while running in Audit Only Mode.