Fluke Biomedical 6000D Impulse - Manual (Page 16)

Impulse 6000D, 7000DP
Users Manual
2
Table 1. Symbols
Symbol Description
W
Important information; refer to manual.
~
Do not dispose of this product as
unsorted municipal waste. Go to Fluke’s
website for recycling information.
;
Conforms to relevant Australian EMC
requirements
) Conforms to relevant Canadian and US
standards
X
Hazardous voltage
P
Conforms to European Union directives
CAT I
IEC Measurement Category I – CAT I
equipment designed to protect against
transients in equipment on circuits not
directly connected to
MAINS . Under no
circumstances should the terminals of
the Analyzer be connected to any
MAINS voltage.
Safety Information
In this manual, a Warning identifies hazardous conditions
and actions that could cause bodily harm or death. A
Caution identifies conditions and actions that could
damage the Analyzer, the equipment under test, or cause
permanent loss of data.
XW Warning
To avoid possible electrical shock or personal
injury, follow these guidelines:
•
Use this Analyzer only in the manner
specified by the manufacturer or the
protection provided may be impaired.
•
Read the Users Manual before operating the
Analyzer.
•
Do not use the product if it operates
abnormally.
•
Do not use the product in wet locations,
around explosive gases or dust.