Fluke Biomedical 6000D Impulse - Manual (Page 73)

Defibrillator/Transcutaneous Pacemaker Analyzer
Creating Test Templates
59
7. Click the Custom setup tab to view and define the
parameters used in tests. Test elements have unique
custom setups for the capabilities they provide. An
example is shown in Figure 2-37.
8. If desired, deselect (uncheck) either or both of the
Test Guide Settings checkboxes to disable the Skip
and NA button options.
The Test Guide Settings control whether certain test
elements can be skipped altogether or marked as
Not Applicable (NA) while the tests run. The Skip and
NA buttons, shown below, are enabled by default. If
a setting is enabled, the corresponding Skip or NA
button is available on the toolbar.
eur022.bm
fcz13.bmp
Figure 37. Custom Setup Page for Pacer Parameter Test Element