Guntermann & Drunck CATCenter X systems Operation - Manual (Page 103)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 103
5.6.3.2 Configuring a Video Console
To configure VIDEO CONSOLE and assign specific rights, return to the
CONSOLE CONFIG submenu, select the console marked as a VIDEO
console, and press the
F5 key.
This takes you to the VIDEO CONSOLE configuration window.
E d i t C o n s o l e
C o n s o l e n a m e C O N 0 0 0 0 1 2 4 5
Edit Config rights…
Edit Operation rights…
Edit target access rights…
Edit Personal Profile…
New target rights full
Enhanced keyboard
Auto Logout 00 off
Screensaver time 00 off
Scancode set 2
OSD keyboard layout German
OSD by mouse no
Remember last user name yes
Keyboard required no
OSD blocked no
Reset console video data
Video
ESC TAB: Edit Name F2: Save
In this window, you can perform the following tasks:
 Define the configuration rights to grant to the VIDEO CONSOLE (see
Chapter 5.1.1.3 )
 Define the operation rights to grant to the VIDEO CONSOLE (see
Chapter 5.1.1.4 )
 Determine the targets the VIDEO CONSOLE is to have access to
(see Chapter 5.1.1.5 )
 Define the personal settings of the VIDEO CONSOLE (see Chapter 4 )
 Determine what access the VIDEO CONSOLE has to newly
connected targets (see Chapter 5.1.1.7 ).
 Define after what time period AutoLogout is carried out (see Chapter
5.6.1.1 )
 Activate screen saver mode (see Chapter 5.6.1.2 )