Guntermann & Drunck CATCenter X systems Operation - Manual (Page 15)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 15
To do so, place the cursor onto the desired target and then press the F5 key.
The field changes to edit mode (font color changes to YELLOW). After you
have made all required changes to the target name, confirm your changes by
pressing
ENTER . This exits edit mode for this target.
Alternatively, the target name can be edited in the TARGET MANAGEMENT
menu (see
Chapter 5.3 ).
Hotkey Assignment
To access a target using a hotkey combination (e.g. CTRL + 1 ), you have to
assign a hotkey to the target. This is done in the SYSTEM CONFIG submenu.
First, you define the initial hotkey (see
Chapter 5.8.1, Defining the Initial
Hotkey), and then you assign the desired select keys to a maximum of 9
targets (see
Chapter 5.8.3, Establishing the Select Key).
TAB / Change Sort Criteria (Sort Mode ► A l p h + ◄ )
Press TAB in the SELECT menu to move to the sort field. Change the sort
criteria by pressing SPACEBAR (toggle).
The following sort options are available:
Alph+: Ascending alphabetic sort of the targets
Alph+on: 1. Ascending alphabetic sort of the connected
(Default) targets and subsequently
2. Ascending alphabetic sort of the unconnected targets
Alph-: Descending alphabetic sort of the targets
Alph-on:
1. Descending alphabetic sort of the connected
targets and subsequently
2. Descending alphabetic sort of the unconnected targets
ID: Displays the physical name of the CATpro2
"Show" Area - Changing the Display Mode:
By default, the "Show Field" includes the items "All" and "GRP".
"ALL" means:
All targets are displayed in the list field.
"GRP" means: Only groups are displayed in the list field.