Guntermann & Drunck CATCenter X systems Operation - Manual (Page 61)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 61
Column 3 Enable: This column shows whether a group is currently
activated or deactivated. This column is edited using
the
F6 key on the keyboard.
Four different F-keys are available to you for editing tasks in the footer of the
USER GROUP CONFIG submenu.
In particular, these are:
 F3 : ADD Group Use this key to create a new group
(see Chapter 5.2.1 )
 F4 : Delete Group Use this key to delete an existing group
(see Chapter 5.2.2 )
 F5 : Edit Group Use this key to edit an existing group
(see Chapter 5.2.3 )
 F6 : Enable Disable Use this key to activate or deactivate a group
(see Chapter 5.2.4 )
These editing functions are explained in more detail in the following chapters.
All editing tasks carried out up to this point can be saved by pressing the
F2
key.
Use the
ESC key to exit the USER GROUP CONFIG submenu. If you have
made any changes up to this point but wish to exit the USER GROUP CONFIG
submenu without saving your changes, a notification message to that effect will
be displayed.