Guntermann & Drunck CATCenter X systems Operation - Manual (Page 30)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 30
3.5 User Logout / End Session
The User Logout cancels your login to the CATCenter. It also cancels an
existing connection to a target.
After the function is carried out, the CATCenter LOGIN window is displayed.
To access the system again, you have to re-enter your user password or the
administrator password.
To activate this function, carry out the following steps:
1. Access AdonIS by pressing the key combination (default): CTRL +
NUM
2. Access the OPERATION menu by pressing the F9 key.
3. Move the cursor to the entry "User Logout" and press the ENTER
key or the E key.
Alternatively, the function can be called from the SELECT menu using the
hotkey combination
CTRL + E .
Note: You should always use this function when you want to protect the
CATCenter against unauthorized access, e.g. when you leave your
workstation. When this function is activated, an existing connection to a target
is cancelled.
3.6 Re-Initializing the Mouse
If the mouse of one target stops working during operation or after maintenance
(mouse pointer does not move), it is possible to re-initialize it.
First, check all cable connections to ensure they are seated properly. Please
note that the Mouse-Enable function is always carried out for the respective
active channel only.
To activate this function, carry out the following steps:
1. Access AdonIS by pressing the key combination (default): CTRL +
NUM
2. Access the OPERATION menu by pressing the F9 key.
3. Move the cursor to the MOUSE UTILITY submenu and press the
ENTER key or the F key.
Alternatively, the function can be called from the SELECT menu using the
hotkey combination
CTRL + F .