Guntermann & Drunck CATCenter X systems Operation - Manual (Page 35)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 35
4 Personal Profile Menu (F10)
You can establish user-specific settings in the PERS. PROFILE menu. This
menu is accessed using the following hotkey combination:
CTRL + NUM
(default). Press the F10 key in the window that opens.
From here, the following settings can be established:
G & D P e r s o n a l P r o f i l e
Display temp
Scantime 05
sec
Stepkeys Up Dn
Selectkey, Scan&Default Target
Set Display Position
Set Menu Position
Change own password
Esc: Select F9: Operation
F11: Config F12: Information
Note:
The entries within this window depend on the rights given you by the
administrator. If, for example, you only have the right to change your own
password, only this entry is editble. All other entries are not accessible.
You can select from the entries displayed here using the mouse or the
UP
ARROW and DOWN ARROW keys on your keyboard. Confirm your selection
using the ENTER key or by clicking the left mouse button.
You can access other main menus from the PERS. PROFILE menu. In
particular, these are:
ESC Switches back to the SELECT menu
F9 Switches to the OPERATION menu
F11 Switches to the CONFIG menu
F12 Switches to the INFORMATION menu
To save the changes you have made, press the
F2 key. You are then returned
to the SELECT menu.