Guntermann & Drunck CATCenter X systems Operation - Manual (Page 76)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 76
5.3.1.7 Apple mode
If the Apple computer that is connected to the target module does not react
(properly) when the multimedia keys are pressed, a special keymode for Apple
computers can be activated (option: yes).
Note:
This setting can only be edited with USB versions of the target modules.
5.3.2 Inheriting Existing Target Information
If you have connected a target that is already connected to the CATCenter with
a new CATpro2 (e.g. after the failure of an old CATpro2, the TARGET
MANAGEMENT submenu shows the physical ID of the new CATpro2 instead
of the old target name (this can either be a physical ID of the old CATpro2 or a
logical name for a target assigned to this dongle).
The new CATpro2 can inherit the old target information.
To do so, use the
UP ARROW or DOWN ARROW keys on the keyboard or the
mouse to move to the physical ID of the new CATpro2 in the TARGET
MANAGEMENT submenu. The press the
F7 key (Move). A window opens
listing all targets from the TARGET MANAGEMENT submenu which have the
status
RED and that can be assigned to the new CATpro2.
The targets displayed in this window are shown in white.
The status can be
RED when:
M o v e C P U - I D 1 2 X f 3 4 t o
LINUX Server
Accounting Server
WIN NT
Open BSD
SUN Sparc 5
Enter
ESC