Guntermann & Drunck CATCenter X systems Operation - Manual (Page 90)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 90
Column 2 Type: This column displays the console type. The choices are
"OpenAccess", "Standard", and "Video". If the console is a
standard console, then this console has the right to access
the system and possibly carry out configuration tasks.
Access takes place using an assigned password and login
name. If the console is an "OpenAccess" console (see
Chapter 5.6.2, OpenAccess console type , then the rights of
the console must first be defined. In case of a video console,
target operation using the keyboard / mouse is deactivated
(see
Chapter 5.6.3 , video console type). It is only possible to
view the video display of the device connected to the
console.
The console types can be configured further by pressing the
F5 key (see Chapter 5.6.1 ).
Use the UP ARROW and/or DOWN ARROW keys on the keyboard or the
mouse to select the individual consoles.
All editing tasks carried out up to this point are saved by pressing
F2 .
Press
ESC to exit the menu without saving the changes you have made. If you
choose to do this, a warning message is displayed.
W a r n i n g
You did not save your changes!
Press
F2 to save and exit
ENTER to exit without saving
ESC to cancel
F2 : Save and exit
Enter : Exit without saving
ESC: Cancel
Press the F2 key to permanently save your changes. This returns you to the
CONFIGURATION menu