Guntermann & Drunck CATCenter X systems Operation - Manual (Page 96)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 96
Once you are finished editing, press the F2 key. All changes are saved and
you return to the CONSOLE CONFIG submenu.
In case of a console defined as Standard (see
Chapter 5.6 ) this entry is
inactive and therefore cannot be selected.
5.6.1.10 Reset Console Video Data
A profile that contains information regarding the cable parameters (e.g. cable
length) for every target is saved per console. These values ensure the optimal
display of the video at your workstation. These values are determined and
saved automatically the first time your console connects to a target.
If the cable length between a UCON and the CATCenter changes, this may
influence the display quality. A fuzzy or distorted representation of the target
on your monitor may result.
In order to automatically create new profiles for all connected targets the next
time they connect to this console, the stored profiles can be deleted using the
entry Reset console video data.
To do so, use the UP ARROW and/or DOWN ARROW keys on your keyboard
or the mouse to select the entry Reset console video data in the Edit
Console submenu and then press
ENTER .
The following window opens:
C o n f i r m
Do you really want to delete
all video data for console
CON 00000033?
ESC: Cancel
Enter: OK
Pressing the ENTER key again deletes all video profiles and takes you back to
the Edit Console submenu.
To exit the menu without making any changes, press ESC .