Guntermann & Drunck CATCenter X systems Operation - Manual (Page 104)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 104
 Define the keyboard language the target uses to communicate (see
Chapter 5.6.1.3 )
 Define the keyboard layout to be used (see Chapter 5.6.1.4 )
 Define whether the additional buttons of the Intelli-Explorer mouse are
activated to operate AdonIS (see
Chapter 5.6.1.5 )
 Define if the status of the Numlock key is transferred (see Chapter
5.6.1.7 )
 Define if the user of the VIDEO CONSOLE has an OSD available (see
Chapter 5.6.1.9 )
 Whether the IVT settings for this console are to be reset to zero (see
Chapter 5.6.1.10 )
 Establish the IVT settings for this console (see Chapter 5.6.1.11 )
Use the
ESC key to exit the EDIT CONSOLE menu without saving your
changes.
To save the settings, exit the menu with the
F2 key.
If the VIDEO CONSOLE is deactivated, the settings for the VIDEO CONSOLE
are retained. These settings only become active again if the VIDEO
CONSOLE is reactivated.
5.6.4 Enable / Disable Console (F6)
With the
F6 key ENABLE/DISABLE, you can activate or deactivate a console.
There have to be at least 2 consoles on the CATCenter systems in order for
this function to be carried out. To activate or deactivate a console, use the
UP
ARROW and/or DOWN ARROW keys on your keyboard or the mouse to select
the desired console entry. Press F6 to activate or deactivate the selected
console. If you deactivate a console, column 2 "Type" displays the entry
"disabled".
Please note that you cannot deactivate your own console!
5.6.5 Deleting a console
By pressing the F4 key, you can remove any console within the CONSOLE
CONFIG submenu from the CATCenter system.
To do so, use the
UP ARROW and/or DOWN ARROW keys on your keyboard
or the mouse to select the corresponding entry in the CONSOLE CONFIG
submenu and then press the
F4 key (delete). A confirmation dialogue opens
with the following text: