Guntermann & Drunck CATCenter X systems Operation - Manual (Page 99)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 99
5.6.2.2 Configuring an OpenAccess Console
To configure OPEN ACCESS and assign specific rights, return to the
CONSOLE CONFIG submenu, select the console marked as an OPEN
ACCESS console, and press the
F5 key.
This takes you to the OPEN ACCESS configuration window.
E d i t C o n s o l e
C o n s o l e n a m e C O N 0 0 0 0 1 2 4 5
Edit Config rights…
Edit Operation rights…
Edit target access rights…
Edit Personal Profile…
New target rights full
Enhanced keyboard…
Auto Logout
00 off
Screensaver time 00 off
Scancode set 2
OSD keyboard layout German
OSD by mouse no
Remember last user name yes
Keyboard required no
OSD blocked no
Reset console video data
Video
ESC TAB: Edit Name F2: Save
In this window, you can perform the following tasks:
 Define the configuration rights to grant to OPEN ACCESS (see
Chapter 5.1.1.3 )
 Define the operating rights to grant to OPEN ACCESS (see Chapter
5.1.1.4 )
 Determine the targets OPEN ACCESS is to have access to (see
Chapter 5.1.1.5 )
 Define the personal settings of the OPEN ACCESS (see Chapter 4 )
 Determine what access OPEN ACCESS has to newly connected
targets (see Chapter 5.1.1.7 ).
 Define whether the CATCenter system should support additional
functions of special keyboards (see Chapter 5.6.1.1 )