2 identifying the autoscan function, 3 canceling the autoscan function, 4 setting the autoscan time – Guntermann & Drunck CATCenter X systems Operation User Manual
Page 27: 2 automatically pass through all active targets, 1 calling the autoskip function
Guntermann & Drunck GmbH
CATCenter Operating Manual
Page 27
3.1.2
Identifying the AutoScan Function
Activation of the AutoScan function is shown by "Scan" on the display.
Example:
Win 2000
(Computer name, editable)
CATCenter
(Switch name, editable)
AUTOSCAN
(Active scan function)
3.1.3
Canceling the AutoScan Function
Keyboard or mouse input pauses the AutoScan function and it resumes only
after input ceases. To cancel the function, access AdonIS (
CTRL
+
NUM
) or
select a computer using a hotkey. The scan display disappears.
3.1.4
Setting the AutoScan Time
See Chapter 4.2, Setting the Scan intervall
3.2
Automatically pass through all active targets
The AutoSkip functionality is similar to AutoScan. However, only the
computers that are connected and active are displayed. Unused channels or
computers that are turned off are skipped.
3.2.1
Calling the AutoSkip Function
Carry out the following steps:
1. Access AdonIS by pressing the key combination (default):
CTRL
+
NUM
2. Access
the
OPERATION menu by pressing the
F9
key.
3. Move the cursor to the entry AutoSkip and press the
ENTER
key
or the
B
key.
Alternatively, the function can be called from the SELECT menu using the
hotkey combination
CTRL + B
.
Now the active channels you have access to are connected to your console,
one after the other, for approx. 5 seconds. The time period is identical to the
setting for the AutoScan time.