Guntermann & Drunck CATCenter X systems Operation - Manual (Page 84)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 84
The following window opens:
I V T
Boost 4
Noise filter 0
Fine tuning 36
delay R delay G delay B
0 ns 0 ns 0 ns
F1: Help F2: Save F3: Auto
Settings within the IVT submenu can be established via the UCON and UCON-s.
The delay setting is not available for the UCON-a and UCON-IP.
5.5.3 Video Tuning Setting
After you access IVT, the following settings are available to you in the open IVT
submenu:
 Establishing the video boost.
 Setting the noise filter.
 Fine tuning.
 Delay setting on the colors R, G, and B of the CAT-x cable (this
function is only available for the UCON and UCON-s!).
The IVT submenu appears as follows:
I V T
Boost 4
Noise filter 0
Fine tuning 36
delay R delay G delay B
0 ns 0 ns 0 ns
F1: Help F2: Save F3: Auto
ESC: Exits the IVT submenu without saving changes
F1 : Opens the IVT help window
F2 : Saves all changes and closes the IVT submenu
F3 : Carries out automatic video optimization
You can switch between the individual entries using the UP ARROW and/or
DOWN ARROW keys.