Guntermann & Drunck CATCenter X systems Operation - Manual (Page 71)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 71
access here are displayed in the SELECT menu! To do so, select the desired
entry and then change it to either "No access", "Full access", or "View only".
Press
ESC to exit the menu without saving the changes you have made. If you
choose to do this, a warning message is displayed.
W a r n i n g
You did not save your changes!
Press
F2 to save and exit
ENTER to exit without saving
ESC to cancel
F2 : Save and exit
Enter : Exit without saving
ESC: Cancel
Subsequently, you are returned to the EDIT USER GROUP submenu.
To save the changes you have made, press the F2 key and return to the EDIT
USER GROUP submenu.
Default setting: no access
5.2.3.5 New Target Right
In this line, you can define the access rights the respective user has for new
targets as they are connected.
The following selections are available:
 No (No access to all new targets that are connected) or
 Full (Full access to all new targets that are connected) or
 View (The members of the user group have view-only access to the
targets)
To save the changes you have made, press the
F2 key.
Use the
ESC key to exit the EDIT USER GROUP submenu. If you have made
any changes up to this point but wish to exit the EDIT USER GROUP submenu
without saving your changes, a notification message to that effect will be
displayed.