Guntermann & Drunck CATCenter X systems Operation - Manual (Page 17)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 17
2.4.2 SELECT Menu Symbols
The following symbols are displayed as supplemental information in front of the
target name:
Target being accessed by your own console.
2
Target being accessed by 2 consoles, for
example. Numbering is from 1 – 9 (and A – F
accessed by 2 CATCenter + CATpro2-UC). Your
own console is not accessing this target currently.
If your own console is accessing the target, the
symbol changes ( ).
2.4.3 User-Related Target Display
Due to the option to assign user-specific access rights (see
Chapter 5.1.1.5 ),
the SELECT menu can display different targets for different users.
If a user does not have access to one or more targets, then they are not
displayed in the SELECT menu.
If a user has VIEW ONLY access to a target (see
Chapter 5.1.1.5 ), then this
target is included in the selection list. However, a corresponding message
appears in the screen display if this target is selected.