Guntermann & Drunck CATCenter X systems Operation - Manual (Page 54)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 54
5.1.1.4 Edit Operation Rights
Here you can define which operation rights should be available to the user
account in the OPERATION menu (
F9 ). These rights are the individual rights
of the selected user. These are displayed in the "Ind" column. The effective
rights of the user are displayed in the "Eff" column (see
Chapter 5.1.1.2 ).
By pressing the ENTER key or left-clicking on the entry EDIT OPERATION
RIGHTS in the EDIT USER submenu, the following submenu opens:
O p e r a t i o n R i g h t U s e r 2
S e t a l l r i g h t s t o n o
N a m e E f f I n d
Mouse Reset
yes no
Personal Profile yes no
Multi Access no no
Target Power no no
Change own password yes yes
Esc TAB
F2 Save
In this window, you can use "Set all rights to" to set all entries to one of the
following values:
 yes or
 no
Use the TAB key to access this pre-select field. This key alternates between
the entry "Set all rights to" and the other four operation areas. Use the
Spacebar (toggle) to change the values within the „Set all rights to" field.
Here you can assign operation rights to the user account. Only those
operation items made available to the user are displayed in the OPERATION
menu in white and are therefore available to the user! To do so, select the
desired entry and then change the current value in the column "Ind" to either
"yes" or "no".
Use the
ESC key to exit the OPERATION RIGHT submenu. If you have made
any changes up to this point but wish to exit the OPERATION RIGHT submenu
without saving your changes, a notification message to that effect will be
displayed.
To save the changes you have made, press the F2 key and return to the EDIT
USER submenu.
Default setting: See window display