Guntermann & Drunck CATCenter X systems Operation - Manual (Page 13)

Guntermann & Drunck GmbH CATCenter Operating Manual
Page 13
2.2.2.2 Mouse Operation
AdonIS can also be operated using the mouse.
- Scrolling → Selecting an entry
- Left button → Enter
- Right button → Escape
This assignment applies to all AdonIS windows.
2.3 Target Selection Using Hotkey
In the delivery condition, no select keys for direct selection of a target have
been defined. You first have to define these select keys in the ASSIGN
SELECT KEY submenu (see
Chapter 4.4 ) for a maximum of 10 targets.
To switch, you then press and hold the
CTRL key and press the NUMBER key
of the desired channel according to your settings in the ASSIGN SELECT KEY
submenu (see
Chapter 4.4 ).
Allowable number keys are those above the letters, from 1 – 0 (default setting).
Selection of target 1: CTRL (or any other definable Hotkey) + 1
The default setting starts with 1 and ends with 0. The hotkey combination can
be modified (
see Chapter 5.8.1 ).
Once a selection has been made using the keyboard or mouse, the name of
the TARGET and the switch is displayed on your screen for approx. 5 seconds
(screen display).
Example:
Win 2000 (Target name, editable)
Console 1 (Console name, editable)