Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 45)

SpecificationS
HyIntensity Fiber Laser Instruction Manual – 807090 Revision 3 1-13
Beam delivery optical cable (BDO)
The optical power from the fiber laser supply is delivered through the fiber optics in the Beam delivery optical cable.
Because of the small face area and the high power levels, cleanliness of the input and output optical surfaces is critical
to component lifetime and proper operation. Each surface should be inspected, with the magnifier that was supplied
with the system, whenever they are removed from their receptacles. To prevent contamination and chipping, the optical
surfaces should not be touched.
Note: If cleaning is necessary, see the Cleaning Procedure on page 4-4.
Diameter = 2 x radius = 200 mm (8 in)
Caution: the minimum bend radius of the Beam delivery
optical cable is 100 mm (4 in). the fiber can be
damaged if the radius is any smaller.
100 mm
(4 in)
100 mm
(4 in)
200 mm
(8 in)