Hypertherm HyIntensity Fiber Laser Rev.3 - Manual (Page 67)

InstallatIon
HyIntensity Fiber Laser Instruction Manual – 807090 Revision 3 2-19
B Mounting the laser head controller (LHC)
The mounting brackets on the LHC allow for a variety of mounting options. It can be installed under or on another piece
of equipment, and level or tilted. The LHC should be mounted in a location on the gantry that allows the operator to see
the display when changing the nozzle extension on the laser head and during cutting.
LHC mounted on a surface
and tilted down.
LHC mounted on a surface
and tilted up.
Laser head controller mounting bracket dimensions
Diameter
5.0 mm (0.20 in)
4 places
63.5 mm
(2.5 in)
203.2 mm
(2.5 in)
Laser head controller grounding