Device status – K-Patents SeedMaster 2 User Manual
Page 30
Advertising
4
TECHNICAL DATA, MOUNTING AND ELECTRICAL CONNECTIONS
30
30
Power supply
Fig. 4.11 Power supply behind the main circuit board
Device status
There are 2 contact outputs which can be used to monitor the operation of SeedMaster 2. The 3
terminals are located in between the Com1 and Com2 serial port terminals.
Operating :
Closed contact when operating
Common :
The common electrical terminal.
Error :
Closed contact when not in operation.
NOTE: the inputs + Sense and – Sense are not in use.
Advertising