K-Patents SeedMaster 2 - Manual (Page 70)

10 DISPLAY 70
70
“Act. – N” where N = 1…3.
SUPERSATURATION: 1.01 Act . - 1 1 / 0 . 1
1.23
1.02
0.8
21:27 22:27 23:27 1:27
Fig. 10.5
To return to the MAIN DISPLAY push ESCAPE.
TRENDING 2 PARAMETERS
It is possible to trend 2 selected parameters at the same time, too (Fig. 10.6). Having selected the first one
(Fig. 10.4 a)) a second parameter can be selected (UP / DOWN ARROW, Fig. 10.4 b)). By moving the 2
cursors at the same time (LEFT ARROW, RIGHT ARROW) data pairs belonging to the same time will be
displayed numerically.
The cursors can be stopped by a repeated push of the selected horizontal arrow, or by pushing the one of the
opposite direction. It is also possible to view trends of the same parameter pairs based on data acquired
during 3 previous strikes (DOWN ARROW, UP ARROW).
MASS. SOLIDS C.: 88 .9 % Act. 1 / 0 . 1
90
81
65
21:27 22:27 23:27 1:27
SUPERSATURATION : 1 .09 Act. 1 / 0 . 1
1.22
1.01
0.8
21:27 22:27 23:27 1:27
2 MENU
Fig. 10.6
Pushing ENTER will zoom Signal 1 to full size. If followed by keying 2 on the keyboard Signal 2 will appear in
full size. Keying 1 or 2 brings back one or the other of the two signals in full size.
To return to the MAIN DISPLAY push ESCAPE.
10.3 STRIKE HISTORY
It is important to provide reliable information on strikes for the technologists and pan operators right on the
plant floor. The most important parameter of crystallization is supersaturation, but additional massecuite
parameters might provide useful information, too.
There are two ways to obtain information on strikes monitored by SeedMaster 2.