K-Patents SeedMaster 2 - Manual (Page 53)

7 CONFIGURE SeedMaster 2 53
53
CONFIG ->COMMUN. ->COM1 PORT 1 / 0 . 1
PORT NAME COM1
DEVICE NR. 1 / 0 . 1
TYPE RS232
FLOW C. NO
BAUDRATE 9600
DATA BITS 8
STOP BITS 1
PARITY NO
PROTOCOL K-PATENTS SLAVE
MODE ASCII
CHANGE BACK ACCEPT
Fig. 7.14 Configuring the SeedMaster 2 – K-PATENTS PR-01-S communication
using the COM1 port .
The possible selections:
PORT NAME
COM1 (already selected)
DEVICE NR. 1 / 0.1 ; 2 / 0.2
TYPE RS232, RS485, RS422 MD, RS422 PP
(MD: MODBUS; PP: POINT-TO POINT
FLOW C. NO, RTS/CTS, XOFF/XON
BAUDRATE 1200, 2400, 4800, 9600, 19200, 38400
DATA BITS 7, 8, 9
STOP BITS 1, 2
PARITY NO, ODD, EVEN
PROTOCOL K-PATENTS SLAVE, MODBUS SLAVE
MODE ASCII
Terms used:
K-PATENTS SLAVE
It is the protocol used by the K-PATENTS PR-01-S type
process refractometer.
MODBUS SLAVE If selected,
MODB. DEV. ADDR.: 21
RESPONSE TIME : 1 msec
7.8.2 Using the ETHERNET.
Ethernet communication can be used to
•
connect a PR-23 refractometer to the SeedMaster 2 and
•
connect the SeedMaster 2 to a Process Control System (PCS) (see Fig. 7.4)
Fig. 7.15 shows the configuration details when using the ETHERNET.