Leprecon XC 350 - Manual (Page 116)

XC Users Manual
Page
116
11611630
11 Chase
XC Chase patterns are programmable sequences. Chases can be linked to
Cues or Submasters, or selected and controlled standalone from a front panel
fader.
The first four chases are permanent system chases, and cannot be altered.
There are a total of sixteen programmable chase patterns available. Chases can
contain any combination of conventional channels as well as LED or intelligent
fixture data.
11.1 Recording Chases
1. Select instruments, and set Color, Beam and Position as previously
described.
2. Press or click the ‘Record’ button. The Record dialog box will open. The
record dialog always opens to its previous state. If necessary, select the
Chase tab.
3. Click ‘Append new step’ to save the first chase step.
4. Set the scene for the next chase step, and repeat the recording
procedure.