Leprecon XC 350 - Manual (Page 62)

XC Users Manual
Page 62
626230
6.1 Setting Fixture Intensity
1) From the Stage Run screen, select fixtures by clicking, using the channel
dialog, or by selecting previously defined groups.
2) Set intensity by clicking the on- screen level fader, pressing the ‘level’ key
or moving the Level edgewheel. Levels on screen will increase, and the
fixtures will respond as well.
3) Use the Release key, or click Release on the bottom screen menu bar.
The green highlight will disappear, and the channels will remain at their
level.
4) Select a new group of channels. Adjust the levels as needed.