Leprecon XC 350 - Manual (Page 34)

XC Users Manual
Page 34
343430
4. Once the start address is selected, a dialog will open to accept
additional data.
Name:
Meaningful name for the fixture, followed by a fixture number. If inserting multiple
fixtures, each will have the same name, with incrementing fixture numbers for
each.
Int. Channel:
This field allows the intensity channel for an intelligent fixture to be mapped to a
particular board channel. This is used to assign fixture intensity to a board fader.
DMX Line:
Drop down to select one of four DMX lines, A through D.
Pan and Tilt:
Select Normal or Inverted operation for moving head or moving mirror fixtures.
Copies:
Number of consecutively addressed fixtures to be inserted.
5. When all settings are correct, click ‘Save’ to add the fixtures.