Leprecon XC 350 - Manual (Page 51)

XC Users Manual
Page 51
515130
Parked channels are not included in the channel data when cues are recorded.
The interface for Park is shown below.
Select the Park tab and the Park screen will appear.

To park a desk channel use the left dialog box.

To park a DMX or dimmer channel use the right dialog box
1. Select the desired dialog box and the on-screen keypad will appear.
2. Enter the Channel number and Level
3. The parked channel number and level will appear in a list to the right of
the dialog box.
4. To Un-Park a channel, highlight a desk channel or dimmer channel from
the list and select Delete.
Note: If any channels or dimmers are Parked, a red indicator with the letter
‘P’ is shown on the title bar at the top of the screen.