Leprecon XC 350 - Manual (Page 31)

XC Users Manual
Page 31
313130
4.1.1 Adding conventional dimmers
The default (empty) show in an XC contains 48 channels reserved for dimmers.
This is shown as two 24 channel ‘generic’ dimmers as shown above. More
dimmers can be added to the system by:
1. click on the ‘Add New’ box on the right side of the screen, and choose
‘conventional dimmers’
2. Select a dimmer type by clicking on the name, then drag or simply click
on the destination DMX address.
3. Once the fixture is placed, a dialog will be displayed allowing a name to
be entered, and changes made if needed to the start address or DMX
length before the data is finally saved.