Leprecon XC 350 - Manual (Page 25)

XC Users Manual
Page 25
252530
3.5 Touch Screen Calibration
The XC operating system includes drivers for certain models of ELO touch
screen monitors. The first time the monitor is used, the board may need to be
calibrated for proper touch control.
To calibrate the monitor, press and hold the ‘shamrock’ key. At the same time,
press the ‘setup’ key.
The calibration routine will display a bulls-eye target on the screen in four
different locations. Follow the on-screen prompts, and touch the targets when
instructed.
Once complete, the calibration values will be saved as part of the XC
configuration. Changing to a different size monitor may require re-calibration.
3.6 Real Time Clock
The XC Clock can be used for real time or as a timer.
This feature is located at the top of each screen in the
XC title bar.
Clicking on the clock face will start, pause or reset the