Leprecon XC 350 - Manual (Page 22)

XC Users Manual
Page 22
222230
3.2 Connecting to your system
1. Connect the monitor to the VGA or HDMI Video port. The XC requires a
minimum monitor resolution of 1024 x 768.
2. Connect a USB mouse and keyboard, if needed. The on-board trackball
usually makes using an external mouse unnecessary.
3. If an ELO touch screen is being used, connect the monitor using a USB
(A to B) cable from the touch screen monitor to one of the USB ports.
4. Connect 5 pin DMX data cable(s) to DMX A or B connector(s).
5. Connect the AC power cord.
6. Turn on the Power switch.