Make this setting at “m-dax, In the menu, Tone – Marantz NR1604 User Manual

Page 114: M-dax

Advertising
background image

111

M-DAX

Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the

amount of data by eliminating signal components that are hard for the human ear to hear. The “M-DAX”

function generates the signals eliminated upon compression, restoring the sound to conditions near those

of the original sound before compression. It also restores the original bass characteristics for a rich and

expanded tonal range.

Setting items

Setting details

Mode

Set the mode for “M-DAX”.

High : Optimized mode for compressed sources with very weak highs (64

kbps and under).

Medium : Apply suitable bass and treble boost for all compressed sources

(96 kbps and under).

Low : Optimized mode for compressed sources with normal highs (96

kbps and over).

Off : Do not use “M-DAX”.

• This item can be set with analog signals or PCM signal (Sample Rate =

44.1/48 kHz) is input.

• “M-DAX” settings are stored for each input source.

• When set to “Off”, the M-DAX indicator on the front panel switches off.

• This cannot be set when the sound mode is set to “DIRECT” or “PURE

DIRECT”.

• This can also be set by pressing

M-DAX

.

Each time

M-DAX

is pressed, the setting is changed as shown below.

Off

Low

Medium

High

Audio

Tone

Default settings are underlined.

Adjust the tonal quality of the sound.

Setting items

Setting details

Tone Control

Set the tone control function

to “On” and “Off”.

On : Allow tone adjustment (bass, treble).

Off : Playback without tone adjustment.

“Tone Control” can be set when “Dynamic EQ” (

vpage 113

) is set

to “Off”.

NOTE

• “Tone Control” settings are not reflected to ZONE2.

• The tone cannot be adjusted in the “DIRECT” and “PURE DIRECT”

mode.

• The default setting differs depending on the sound mode.

Bass

Adjust bass.

–6dB – +6dB

• “Bass” can be set when the menu “Tone Control” setting is “On”.

• The default setting differs depending on the sound mode.

Treble

Adjust treble.

–6dB – +6dB

• “Treble” can be set when the menu “Tone Control” setting is “On”.

• The default setting differs depending on the sound mode.

Basic instructions

Advanced instructions

Information

Advanced instructions

DVD

Advertising