Marantz NR1604 - Manual (Page 137)

134
Information
Show information about receiver settings, input signals, etc.
Items Setting details
Audio
Show information about
audio input signals.
Sound Mode : The currently set surround mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front, surround,
LFE).
Sample Rate : The input signal’s sampling frequency.
Offset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround back
channel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrix
signals, “DISCRETE” with DTS-ES Discrete signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual program
sources.
The correction value can be checked using the STATUS on the main unit.
Offset: - 4dB
The figure is the corrected value. This cannot be changed.
Video
Show information about
HDMI input/output signals
and HDMI monitors.
HDMI Signal Info.
• Resolution / Color Space / Pixel Depth
HDMI Monitor
• Interface / Resolutions
ZONE
Show information about
current settings.
MAIN ZONE : This item shows information about settings for MAIN
ZONE. The information displayed differs according to the input source.
• ZONE Name / Select Source / Name / Sound Mode / Input Mode /
Decode Mode / HDMI / Digital / Analog / Component / Video /
Video Select / Video Mode / Content Type / Video Conversion /
i/p Scaler / Resolution / Progressive Mode / Aspect Ratio etc.
ZONE2 : This item shows information about settings for ZONE2.
• ZONE Name / Power / Select Source / Volume Level
Firmware Version : Displays information for the current firmware.
Notifications
Selects notification message
preferences.
Notification Alerts
• On : Displays notification messages from Marantz in the popup menu.
• Off : Does not display notification messages from Marantz in the popup
menu.
Press INFO to display current source name, volume, sound mode name, and other information at the
bottom of the screen.
Examples of screen display
• Status display screen
When the input source is switched. When the volume is adjusted.
INPUT DECODE
SOURCE
SOUND
Auto DTS
DVD
DTS SURROUND
50.0
Status display: The operating status appears briefly on the screen when the input
source is switched or the volume is changed.
NOTE
The status display screen cannot be displayed at a computer’s resolution (e.g. VGA) or while certain 3D
video contents is being played.
General Basic instructions
Advanced instructions
Information
Advanced instructions
DVD