Surround, Sound modes and surround parameters, Symbols in the table – Marantz NR1604 User Manual
Page 147
144
Surround
This unit is equipped with a sophisticated digital signal processing circuit that lets you play your favorite movie and music sources and listen to them with a wide range of surround sound mode choices.
Sound modes and surround parameters
This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode.
Symbols in the table
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (
)
Channel output
Front
L/R
Center
Surround
L/R
Surround back
L/R
Front height
L/R
Subwoofer
Home Theater EQ
Loudness
Management
z2
(
)
Dynamic
Compression
z3
(
)
Low Frequency
Effects
z4
)
Height Gain
z5
DIRECT/PURE DIRECT (2-channel)z1
S
Dz8
S
S
DIRECT/PURE DIRECT (Multi-channel)z1
S
D
D
Dz6
Dz6
D
S
S
S
STEREO
S
D
S
S
S
MULTI CH IN
S
D
D
D
Dz7
D
S
S
S
DOLBY PRO LOGIC gz
S
D
D
D
D
S
S
S
S
DOLBY PRO LOGIC gx
S
D
D
D
D
S
S
S
DOLBY PRO LOGIC g
S
D
D
D
S
S
S
DTS NEO:6
S
D
D
D
D
S
S
S
DOLBY DIGITAL
S
D
D
D
Dz7
D
S
S
S
S
DOLBY DIGITAL Plus
S
D
D
D
Dz7
D
S
S
S
S
DOLBY TrueHD
S
D
D
D
Dz7
D
S
S
S
S
S
DTS SURROUND
S
D
D
D
Dz7
D
S
S
S
S
DTS 96/24
S
D
D
D
Dz7
D
S
S
S
S
DTS-HD
S
D
D
D
Dz7
D
S
S
S
S
DTS Express
S
D
D
D
Dz7
D
S
S
S
S
MULTI CH STEREO
S
D
D
D
D
D
S
S
S
VIRTUAL
S
D
S
S
S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z2 This item can be selected when a Dolby TrueHD signal is played.
z3 This item can be selected when a Dolby Digital or DTS signal is played.
z4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z5 This setting is available when the set sound mode name contains “+PLgz”. For information on how to check the sound mode, see
z6 A signal for each channel contained in an input signal is output as audio.
z7 Audio is output from the front height speaker when the set sound mode name contains “+PLgz”. For information on how to check the sound mode, see
z8 Only when “Subwoofer Mode” is set to “LFE+Main” (
), sound is output from the subwoofer.
Basic instructions
Advanced instructions
Information
Information
v See overleaf
DVD