Marantz NR1604 - Manual (Page 142)

139
Display
t r y u i o Q0 Q1 Q2
q w e
q Information display
The input source name, sound mode, setting values and other
information are displayed here.
w Input signal indicators
e MULTI ZONE indicators
This lights up when ZONE2 (separate room) power is turned on
( vpage 101 ).
r MUTE indicator
This lights when the audio mute mode is selected ( vpage 30 ).
t Master volume indicator
y Circle indicator
Circle indicator is displayed when the input source is “NETWORK”
or “iPod/USB” when you are playing back music.
u Sleep timer indicator
This lights when the sleep mode is selected ( vpage 96 ).
i Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “TUNER”.
STEREO : In FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
o Audyssey® indicator
This indicator lights when the “MultEQ®” ( vpage 112 ), “Dynamic
EQ” ( vpage 113 ) or “Dynamic Volume” ( vpage 113 ) setting
is set to other than “Off”.
Q0 Decoder indicator
These light when Dolby or DTS signals are input or when the Dolby
or DTS decoder is running.
Q1 Surround back indicator
This lights when audio signals are being output from the surround
back speakers ( vpage 124 ).
Q2 Input mode indicators
Set the audio input modes for the different input sources
( vpage 122 ).
Basic instructions
Advanced instructions
Information Information
DVD