Marantz NR1604 - Manual (Page 33)

30
Adjusting the master volume
Use VOLUME df to adjust the
volume.
• The volume display method varies
depending on the “Scale” setting
( vpage 112 ).
n When the “Scale” setting ( vpage 112 ) is “0 – 98”
GAdjustable rangeH 0.0 0.5 – 98.0
n When the “Scale” setting ( vpage 112 ) is “–79.5dB –
18.0dB”
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning VOLUME on the
main unit.
Turning off the sound temporarily
Press MUTE : .
• “MUTE” indicator on the display flashes.
• : appears on the TV screen.
• The sound is reduced to the level set at “Mute Level” ( vpage 112 ).
• To cancel, press MUTE : again. Muting can also be cancelled by
adjusting the master volume.
Important information Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press POWER X to turn on power to the unit.
3
Press DVD or Blu-ray to switch an input source for a
player used for playback.
4
Play the Blu-ray Disc player or DVD player.
• Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
Playing a CD player
The following describes the procedure for playing CD player.
1
Prepare for playback.
q Turn on the power of the subwoofer
and player.
w Load the disc in the player.
2
Press POWER X to turn on
power to the unit.
3
Press CD to switch the input
source to “CD”.
4
Play the CD player.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD