Specifications – Marantz NR1604 User Manual
Page 161
158
Specifications
n Audio section
• Power amplifier
Rated output:
Front:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors:
6 – 8 Ω/ohms
• Analog
Input sensitivity/Input impedance:
130 mV/47 kΩ/kohms
Frequency response:
10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
98 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance:
Y signal — 1 Vp-p, 75 Ω/ohms
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 60 MHz — 0, –3 dB
n Tuner section
[FM]
[AM]
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W)
Receiving Range:
87.5 MHz – 107.9 MHz
520 kHz – 1710 kHz
Usable Sensitivity:
1.2 μV (12.8 dBf)
18 μV
50 dB Quieting Sensitivity:
MONO
2.8 μV (20.2 dBf)
S/N :
MONO
70 dB (IHF–A weighted, DIRECT mode)
STEREO 67 dB (IHF–A weighted, DIRECT mode)
Total harmonic Distortion:
MONO
0.7 % (1 kHz)
STEREO 1.0 % (1 kHz)
n General
Power supply:
AC 120 V, 60 Hz
Power consumption:
Power consumption in standby mode:
Power consumption in CEC standby
mode:
Power consumption in network
standby mode:
220 W
0.2 W
0.5 W
2.7 W
For purposes of improvement, specifications and design are subject to change without notice.
Basic instructions
Advanced instructions
Information
Information
DVD