Connecting an external control device, Dc out jack – Marantz NR1604 User Manual
Page 97
Advertising
94
Connecting an external control device
DC OUT jack
When a device with DC IN jack is connected, the connected device’s power on/standby can be controlled
through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
12 V/150 mA trigger-compatible device
NOTE
• Use the monaural mini-plug cable for connecting DC OUT jacks. Do not use the stereo mini-plug cable.
• If the permissible trigger input level for the connected device is larger than 12 V/150 mA, or has shorted,
the DC OUT jack cannot be used. In this case, turn off the power to the unit, and disconnect it.
Basic instructions
Advanced instructions
Information
Advanced instructions
DVD
Advertising