NCast PR-HD - Manual (Page 46)

NCast Presentation Recorder Reference Manual
5.11.3.Remove Recording After Upload is Finished?
The recording will be removed after the archive has been transferred to its target location. Actually, the
recording is not removed but is placed into the Trash Can where it remains until accumulated Trash exceeds
the space allocated for it. Trash is carried out at the time a new recording starts. This means that generally a
recording remains available for some time after Upload even though it has been “officially” removed. See
Section 7.10.3. for a discussion on disk space management.
There is an option to “Remove Archives Automatically” which will unconditionally delete recordings when
space is needed. See Section 7.10.6. for information on how to enable this option.
5.11.4.Set Upload Method
There are potentially five different target locations for a finished and ready file: a server using File Transfer
Protocol (FTP), a server using Secure File Transfer Protocol (SFTP), a locally inserted USB stick, transfer to
a Presentation Server using the Capture Agent REST protocol or transfer to a Kaltura server using the
Kaltura API.
There is a Primary Upload choice and a Secondary Upload choice. This allows the Presentation Recorder to
target two different entities for delivery of the file.
For example, the Primary choice could be set to USB and the secondary choice to Presentation Server. This
would allow the Presenter to walk away with the recording on a USB stick and a backup copy is sent to
Presentation Server for processing there.
Another example would be to set the Primary choice to Presentation Server for local content distribution, and
the Secondary choice to FTP the file to a remote CDN service.
The Upload settings are on a per-channel basis, so use of different Channels can facilitate upload to different
places when the archive is ready.
5.11.5.Connection Test
NCast Corporation Revision 2.2
Page 46