NCast PR-HD - Manual (Page 47)

NCast Presentation Recorder Reference Manual
The PR-HD will try to connect to the server and list contents of the upload directory. It uses the current
configuration of all parameters.
5.11.6.Multiple Upload Locations
The Upload information is specified on a Channel basis. Since each Channel has its own unique target
information, different target locations may be accessed by starting or using different Channels.
For example, if the Session starting at 9:00 am needs to be uploaded to Dept. A's server, and the Session
starting at 10:00 am needs to be uploaded to Dept. B's server, this is easily accomplished by specifying
different target sites in the Channel Table. Or if some uploads go to a local, on-campus server and if other
uploads go to a remote CDN server, the Channel Table settings may be used to differentiate the upload
repository for each different recording.
Information about what Channel was used to record an archive is retained with the archive. If later, from the
Archives page, a new upload or re-upload is requested, the system extracts current target settings from the
Channel Table entry and uses that target information to upload the recording. Thus, the “Upload All
Archives” operation may result in the transfer of existing archives to many different target sites.
5.11.7.File Transfer Protocol
Select “File Transfer Protocol” and fill in the required fields.
5.11.8.Upload XML File
The XML file is a metadata file containing everything the recorder knows about the frecording. It can be used
for automatic indexing and processing of the file. Keep this checked unless the XML is not used and does
not need to be uploaded.
5.11.9.Set Server
Enter the IP address or DNS name of the server
NCast Corporation Revision 2.2
Page 47