Archives, Archive settings – NCast PR-HD User Manual

Page 53

Advertising
background image

NCast Presentation Recorder Reference Manual

6. Archives

6.1. A

RCHIVE

S

ETTINGS

The Presentation Recorder units allow complete recording of audio and graphics streams onto internal
storage for later retrieval and playback.

The estimate for recording time is a simple calculation based on the bit-rate set for the channel.

Take the bit rate set for the channel in use and divide by eight to get the bytes/second of archive space
needed. Multiply by 3600 to get the bytes required per hour.

So for a 5 Mbps stream (graphics plus audio) we estimate 625,000 bytes/second or 2.25 GB per hour. If we
use a 16 GB archive disk that's about 7.1 hours of recording. The disk size in the unit is noted at the
beginning Archive page.

The resolution and frame-rate of a channel aren't as important as the max bit-rate set for operation.
Recording times may be slightly longer than the above calculation would suggest because the actual bit-rate
generated during operation varies with the material being encoded, and the calculation above should
represent worst-case conditions.

Archive files are named with time-stamp information indicating the start time of the archive:

yyyymmdd-hhmmss-nnn.mp4

where

yyyy Year of archive

mm

Month of archive

dd

Day of archive

hh

Hour of archive

mm

Minute of archive

ss

Second of archive

nnn

Channel number

.mp4 File format, MPEG-4

The default archive filename may be changed (See Section 5.10.2 above).

NCast Corporation

Revision 2.2

Page 53

Advertising