Orion System GPC-XP Controller - Manual (Page 10)

Section 3: GPC-XP Navigation & Status
GPC-XP Controller Technical Guide 10
Selecting and Naming GPC-XP Controllers
Selecting GPC-XP Controllers
NOTE: See the Prism 2 Technical Guide for instructions on
setting up the job site and doing a search for units.
From the Prism 2 Main Screen, click on the GPC-XP Controller
address in the Unit Selection Window. In this example, it is address
18. See Figure 6 below.
Figure 6: Prism 2 Main Screen GPC-XP Controller Selection
Naming GPC-XP Controllers
If you have more than one GPC-XP Controller, you can rename it
in the Selected Name Dialog Box. See Figure 7 below. Many users
name their GPC-XP Controller according to the application that it
performs.
Figure 7: Naming the GPC-XP Controller
Selected Name Dialog Box
Unit Selection