Orion System GPC-XP Controller - Manual (Page 28)

Section 7: Confi guring Analog Outputs
GPC-XP Controller Technical Guide 28
Analog Outputs
The Analog Outputs Window is located in the lower right-hand side
of the GPC-XP Controller Status Screen (Figure 8, page 11). There
are 4 Analog Outputs. See Figure 51 below for the Analog Outputs
Window component summary. See the pages that follow for details.
Right or Left-click on any of the Analog Output
name fi elds to access the description entry box
and change the name of the Analog Output.
Left-Click in the data entry fi eld to confi gure the
Analog Output.
Right-Click on these fi elds to access the
Override and Cancel Override options.
The Light bulb will light up when the Output is in the
Occupied Mode.
Figure 51: Analog Outputs Window Components and Navigation
Renaming Analog Outputs
To give the Analog Output a new name, click on the blue highlighted
Analog Output # fi eld and the Analog Output Data Entry Dialog
Box will open (Figure 52 below). Once you have typed in a new
description, press
<ENTER> to save.
Figure 52: Analog Output Data Entry Dialog Box
Components and Navigation
Enabled or Disabled indicates whether the output is active
or inactive.
Current Analog Output Setpoint