Orion System GPC-XP Controller - Manual (Page 57)

GPC-XP Controller Technical Guide
Index
57
O
OA Dewpoint..............31
,
33
,
34
OA Humidity..............34
OA Humidity Sensor Input..............42
OA Temperature..............34
OA Temperature Sensor Input..............42
OA Wetbulb..............31
,
33
,
34
OE338-23-GPC-XP..............3
Off Above / Off Below..............22
Off Above / On Below..............22
On Above / Off Below..............22
On Above / On Below..............22
Operating System..............9
Outdoor Air..............31
,
33
Outdoor Air Broadcasts..............42
Outdoor Air Enable Setpoints..............32
Outdoor Air Enable Window..............32
Outdoor Status..............34
Output Active When Relay Contact is Closed..............27
Output Active When Relay Contact is Open..............27
Output Voltage Limits..............32
Override
Analog Output..............33
Schedule..............38
Override Binary..............19
Override Duration..............14
Override Reading
Analog Inputs..............16
P
PID Control..............30
PID Derivative Filter..............30
Printer Selection..............46
Printer Selection Drop Down Menu..............51
Printing..............45
Status Reports..............47
Printing Status Reports..............47
Printing Trend Logs..............46
Print Menu..............47
Prism 2
System Requirements..............9
Prism 2 Main Screen..............10
Prism 2 Software..............9
Prism 2 Technical Guide..............9
Proof Failure Time Delay..............27
Proportional Control Window..............30
Push-Button Override..............18
R
Read Global Analog – Channel..............13
Read Global Binary..............18
Readings to Average..............15
Relay Confi guration Screen..............21
Relay Output Type..............27
Relay Output Type Window..............27
Relays..............20
Binary Input to Follow..............24
,
25
Confi guring..............21
Controlling Schedule..............24
,
25
Control Method Field..............22
Control Source Field..............23
Control Source Setpoints..............24
Delay & Run Times..............27
Enabling Relay..............25
Lead/Lag Control..............27
Logical AND Control Method..............26
Logical OR Control Method..............26
Main Control Method..............22
Naming..............20
Relay Output Type..............27
Relay to Follow..............25
Renaming..............20
Run Time Alarming..............27
Timing & Alarming..............27
Ventilation Control..............27
Relay Status
Alarm Notifi cation..............39
Relays Window..............20
Relay to Follow..............25
Reset Defaults..............43
Reset Lead/Lag Button..............39
Reset Limits..............31
Reset Rogue Sensors............42
Reset Source/Reset Source Limits..............24
Restoring Setpoints..............44
Reverse Acting Floating Point..............29
Reverse Acting PID..............29
Rogue Sensor Reset Limits...........42
Run Time Alarm Delay Period..............27
Run Time Alarming..............27
O-R